Chlorinator (Type 0, S-0 Type)

This chlorinator disinfects effluent at the final stage of the wastewater treatment process by being filled with chlorine agent, or disinfectant.

Features
- The body is made of PVC and will not corrode.
- The lid has a handle and helps prevent rain and dust from entering.
- The dissolution of the chlorine agent can be adjusted by adjusting the scale on the adjustment gate at the bottom.

How to Use
1. Adjust the amount of incoming water by opening and closing the gate, and check the residual chlorine at the final discharge outlet of the disinfection tank.

2. Adjust the adjustment gate so that the residual chlorine in the effluent from the disinfection tank reaches the specified value at the maximum flow rate.

3. A scale plate is attached to the gate opening and closing section, so check the adjustment there.

4. After adjustment is complete, tighten the knob to fix it in place.

5. The tablets dissolve according to the flow rate and release chlorine, so no further adjustment is required.

6. Refill the chemical agent as needed.